One of the fanciest things you can do to give your PC a stunning appearance is to mount your GPU vertically. You probably don’t want your graphics card looking downward if it has RGB lights or if you went above and beyond and added a custom water-cooling system. Although many PC cases allow for vertical GPU mounting, these cases can be rather expensive, and the likelihood that you will change your case if you already have one you like is quite low.
There are a few considerations when mounting a vertical GPU. First, check to see if your motherboard and GPU are compatible. Most contemporary GPUs will easily slide into vertical mount gpu brackets, although some older models can be too big. After that, determine whether your GPU has a backplate. If it does, you must take it out before vertically mounting the GPU. Here is a guide to get you started.
Why is a GPU Mounted Vertically Important?
The most frequent justification is to minimize drooping caused by bulkier cards pressing so heavily on the PCIe slot. The secondary goal is to fully appreciate RGB illumination, which some cards have built-in but may otherwise be obscured by other nearby components.
Because the GPU is fully visible through a transparent side panel, it is popular in the custom PC building community. After all, if you spent a lot of money on your high-end graphics card, it only makes sense to show it off.
Given that you’ll lose access to nearby PCI lanes and frequently make nearby M.2 SSD sockets more difficult to reach, it’s not something you should get into without extensive study. With careful vertical GPU mounting, the results can be elegant and provide extra space for an elaborate liquid cooling system. You may be better off purchasing a GPU support brace if all you’re trying to do is stop GPU sagging.
There are a few things you should think about before installing your GPU vertically before you go out on this quest.
Vertically mounted graphics cards frequently obstruct the PC case’s ability to breathe. Installing one exhaust fan in the back and two intake fans in the front of the case will help prevent this. The width of your graphics card must not exceed 2.5 to 2.7 slot width.
I advise purchasing a different case with a vertical mounting bracket to prevent airflow obstruction if your graphics card is larger. If your GPU occupies more space, your fans will run at a higher frequency and voltage owing to congestion. Your graphics card will experience increased temperatures as a result.
A GPU (graphics processing unit) installed vertically on a motherboard is a vertical mount GPU. High-end gaming machines and workstations that place a premium on video processing speed employ this kind of GPU.
Compared to conventional horizontally mounted GPUs, GPU side mounts have better cooling and airflow. Furthermore, vertical mount GPUs may frequently be overclocked to higher frequencies than their horizontal equivalents, resulting in even greater vertical mount gpu performance.
You can get gpu vertical mount kit if you want. This step-by-step guide will help you:
- The PCI-E slot on your motherboard can find. It is where your GPU will be mounted.
- Discover the fasteners holding the PCI-E slot in place. These are typically found on the motherboard’s back.
- The PCI-E slot should now be easily removed from the motherboard by removing the screws.
- Your GPU should be inserted into the PCI-E slot.
- Use the screws included with your GPU to fasten it to the PCI-E slot.
- The PCI-E slot should be replaced and secured with a screw.
- Connect your power supply to your GPU.
- Connect your GPU to your monitor.
- Start your computer, then have fun!
Given that it is the traditional way to mount the graphics card let’s start with the horizontal GPU mounting. The typical installation method for a GPU is to mount it horizontally, with the front of the GPU facing downward and the bottom of the computer casing. Although it doesn’t have the most appealing appearance, it has been tried and tested and does the job.
The vertical GPU mount is an abundant feature you may provide your PC. If your side panel is clear, you may see the graphics card in all its splendor. It is because the graphics card’s front faces outwards rather than downward.
Instead of vertically putting a GPU on a motherboard, there are several advantages. The first benefit is that it improves airflow over the motherboard and other components, which keeps everything cooler. Second, it makes it simpler to attach and disconnect wires by allowing easier access to the ports and connectors on the GPU’s rear. Finally, it can improve a build by making it look neater and more put together.
Horizontal GPU mounting may have a few drawbacks as well. First, vertical mount gpu cables must route across the motherboard; it can be more challenging to route them correctly.
Second, since it will probably block one of the PCI slots, using a typical GPU cooling shroud with a horizontal mount might not be practical. Finally, checking the dimensions of your vertical mount gpu case before selecting this option is important because some cases might not have enough clearance for a horizontal GPU mount.
Most designs prefer horizontal GPU mounting since it provides greater cooling and simpler access to ports and connectors. It’s important to examine all the benefits and drawbacks before choosing because vertical GPU mounting might be a superior choice in some circumstances.
Be aware that choosing the vertical GPU mount may cause some problems in some situations. It either comes too close to the side panels or interferes with the graphics card’s breathing ability. However, vertically mounted GPUs might still be a fantastic choice when creating custom liquid-cooled PCs.
Although it’s not always bad, vertical GPU mounting may not be the best option for your system. Vertical GPU mounting can save you a lot of space if you have a small case or restricted area. However, a lack of airflow may complicate cable management and make your GPU run hotter.
The existence of a built-in fan on your GPU is another thing to consider. If so, installing your GPU vertically can enhance airflow and keep it cooler. To minimize your GPU overheating, you may want to avoid vertical GPU mounting if your GPU doesn’t have a built-in fan.
Ultimately, it’s up to you to decide if vertical GPU installation is the best option for your setup. If you’re unsure, it’s advisable to use a different mounting option and err on the side of caution.
GPU sag, which occurs when your graphics card sags down in horizontal installations due to the weight of the card and lack of support, is one of the advantages of vertical mounting. It is easily resolved for vertical structures because you can utilize a GPU support bracket to prevent it.
Because of its attractiveness and visual appeal, custom PC builders frequently choose a vertical GPU mount. In addition to displaying graphics cards with RGB lights, a vertical mount is appropriate if these cards are water-cooled. You can see the best cooling and water block activities as they happen. If your graphics card is facing the bottom of your case, you won’t be able to see this view. Simply said, placing the GPUs vertically gives your project more aesthetic appeal. Many modern premium graphics cards come equipped with stunning RGB effects. In addition, they are now completely configurable and perfect for RGB enthusiasts. Vertical GPU mounting is the best option to make the most of the RGB lighting.
The Corsair 4000D vertical gpu mount had excellent build, quality, airflow, and noise levels. The interior had enough room, and the construction itself was simple. I would heartily suggest vertical mount gpu corsair as a mid-tower case.
A backplate attached to the back of a graphics card is called a GPU backplate. Some of your GPU’s circuitry will visibly expose if you don’t have a backplate, but one will completely block it off.